No miter scale on the marketplace can use you the margin of safety offered by this "sled". The versatile hold-down clamp included with every Dubby will certainly offer you a very risk-free method to reduce tiny items, as well as will conveniently pivot out of the way when you don't require it. With 35 lbs. of hold-down stress, the clamp will certainly hold tiny pieces as you reduced them with your fingers from damages method. A. Depth of table saw top: This dimension must be at least 27 ″. If this measurement is less than 27 ″, the table saw top will certainly be also tiny to securely sustain the Dubby system. Under some circumstances, adding a rear assistance table to the saw top could solve this problem, yet you must contact us to confirm it would allow you to mount the Dubby on your saw. B. Distance from the saw blade to the side of the expansion: This measurement must be at least 19 ″. You have to guarantee that the Dubby platform will not overhang the outside edge of the extension. C. Width and deepness of miter groove: The miter grooves on the saw must be 3/4 ″ large and also 3/8 ″ deep. The grooves could be a little undersize or huge, as our adjustable/self-adjusting bar will accommodate these variants. D. Distance from the left miter groove to the blade: For "basic" Dubby orders this dimension need to be in between 4 ″ and also 5 3/4 ″. If this dimension is not in between these dimensions, the dubby will certainly not fit.